The Quick Mount PV Composition Shingle Flashing Mill finish, QMSC A is made of aluminum and includes stainless steel hardware. It works with all standard racks, installs seamlessly and provides low-profile mount. The flashing includes an attached standoff block and stainless steel hardware.
There's no need for trimming shingles to force a fit. Drill one pilot hole into the rafter, backfill it with appropriate sealant, slide the Quick Mount flashing beneath the felt in the course above, drive the bolt home, and it's done.
The 12 x 12-inch Composition Mount flashing is designed to fit within a standard 5 to 5.5" course and the exposed course should be no greater than 5.75". If the exposure is greater than this, use the Shake Mount as an alternative. There's no shingle cutting and no shingle distortion caused by trying to force a fit. Just a permanent, watertight mount every time! PV, Solar Hot Water, and More
The Quick Mount PV Composition Roof Mount is the logical choice not only for solar PV installation, but also for rooftop solar hot water systems. In fact, whatever you need to fasten to a composition roof – HVAC equipment, antennas, satellite dishes – use Quick Mount PV to secure and protect every roof installation you put your name on.
Features
*ICC certified
*One bolt installation
* No shingle cutting
*100% IBC, UBC compliant
* Meets or exceeds all NRCA standards and practices
* All aluminum flashing and mount
* Stainless steel hardware
* 50 year life
* Works with all leading racks
Sold in boxes of 12 flashings – QMSC