OutBack Power FLEXpower Multi-FXR inverter Pre-Wired Power Systems
The FLEXpower pre-wired power panels integrate inverter/chargers, FM80 or FM100 charge controls, and all of the essential protective devices in an easy-to-install, fully pre-wired and factory-tested system. The FLEXpower is applicable for either grid-tied or off-grid applications with modest power requirements, such as homes, light commercial or larger backup-power systems. Utilizing a compact all-on-one mounting plate design, they are fully pre-wired and factory tested. A FLEXpower can be mounted in either a horizontal or vertical orientation to allow installation in space-limited locations. There are also mounting locations for an AC GFCI Type B outlet and additional DC and AC breakers.
FP systems with VFXR or FXR inverters can be used for either grid-tied or off-grid applications and have the capacity to work with a variety of batteries, as well as advanced OutBack features including Grid Zero and Offset modes.
Each FP2 is designed for 120/240 VAC single-phase output. Each power panel includes two inverter/chargers, two FM80 or FM100 charge controllers, FlexNetDC, AC and DC wiring boxes, a MATE3s, HUB10, and an AC/DC Surge Protector, X-240 transformer (not on FXR systems), inverter and controller breakers with GFDI,
and an AC Input-Output-Bypass Assembly. Dimensions are 59"W x 21"H x 13"D. Weight is 260 lbs.
Each FP3 is designed for 120/208 VAC three-phase output. Each power panel includes three inverter/ chargers, three FM80 or FM100 charge controllers, FlexNetDC, AC and DC wiring boxes, a MATE3s, HUB10, and an AC/DC Surge Protector, inverter and controller breakers with GFDI, and an AC Input-Output-Bypass Assembly. Dimensions are 59"W x 46"H x 13"D. Weight is 430 lbs.
Each FP4 is designed for 120/240 VAC single-phase output. Each power panel includes four inverter/ chargers, four FM80 or FM100 charge controllers, FlexNetDC, AC and DC wiring boxes, a MATE3s, HUB10, and an AC/DC Surge Protector, X-240 transformer (not on FXR systems), inverter and controller breakers with GFDI, and an AC Input-Output-Bypass Assembly. Dimensions are 59"W x 46"H x 13"D. Weight is 520 lbs.
The inverters in the FLEXpower Multi-inverter systems are listed to UL1741 SA (Supplement A) specifications for Grid Support Utility Interactive Inverters.
Length47.5 INWidth21.5 INHeight20.5 INWeight282.0 LBManufacturer Part NumberFP2 FXR2524A-01DescriptionPre-wired dual-inverter system, 5.0 kW 120/240 VAC, 24 VDCRated Power5000.0Voltage24Charge ControllerFM80System ControllerMate3sNEMA RatingNEMA 1 (indoor)