|
|
Magnum MS2812, 2800W 12V Sine-Wave Inverter
Magnum Energy
MS Series Inverter |
The MS Series Inverter/Charger from Magnum Energy is a new pure sine wave inverter designed specifically for the most demanding mobile applications. The MS Series is powerful, easy-to-use, and best of all, cost effective. These inverters are designed for RV, marine and truck applications.
The MS Series is ETL listed to the stringent requirements of UL/cUL 458 for mobile use.
Features
You asked and Magnum listened.
The MS Series Inverter/Charger is loaded with features:
Pure sine wave: Power your T.V.s, stereos, plasma screens, and other sensitive electronics without worry. The pure sine wave inverter and power factor corrected charger provide clean, reliable inverter power with low total harmonic distortion (THD) of less than 5%.
Choices: The MS Series comes in four power models and 12 and 24 volt configurations, allowing you to choose the model that is right for you.
Versatile mounting: Mount the MS Series on a shelf, bulkhead, or even upside down.
Lightweight: The lightweight aluminum base and cover also provides noise reduction and corrosion resistance.
Multiple ports: The MS Series provides multiple ports, including an RS485 communication port for network expansion, and a remote port.
Accessible design: The extra large AC access cover with terminal screw block and 360° DC connection terminals with covers make this inverter more accessible when it needs to be.
Convenient switches: The MS Series comes with an on/off inverter-mounted switch with an easy-to-read LED indicator.
Expanded transfer relay: 50 Amp transfer service is available on all models.
Buy with ease: The MS Series is backed by a three-year (36-month) limited warranty.
Accessories and Options
Remote control: For convenient finger-tip operation, including the new one-knob™ programming.
AGS module: Automatically starts and stops your generator based on temperature or battery voltage.
Specifications
| Model |
MS2000 *
|
MS2012 **
|
MS2812
|
MS4024
|
| Inverter Specifications |
|
Input Battery Voltage
|
9 - 17 VDC
|
9 - 17 VDC
|
9 - 17 VDC
|
18 - 34 VDC
|
|
Nominal AC output voltage
|
120 VAC
|
120 VAC
|
120 VAC
|
120 VAC
|
|
Output frequency and accuracy
|
60Hz ± 0.005%
|
60Hz ± 0.005%
|
60Hz ± 0.005%
|
60Hz ± 0.005%
|
|
Total Harmonic Distortion (THD)
|
< 5%
|
< 5%
|
< 5%
|
< 5%
|
|
1 msec surge current (amps AC)
|
50
|
50
|
70
|
120
|
|
100 msec surge current (amps AC)
|
33
|
33
|
40
|
72
|
|
5 sec surge power (real watts)
|
3300
|
3300
|
3900
|
5800
|
|
30 sec surge power (real watts)
|
3100
|
3100
|
3800
|
5400
|
|
5 min surge power (real watts)
|
2800
|
2800
|
3200
|
4900
|
|
30 min surge power (real watts)
|
2200
|
2200
|
3000
|
4500
|
|
Continuous power output at 25ºC
|
2000 VA
|
2000 VA
|
2800 VA
|
4000 VA
|
|
Rated input battery current
|
225 ADC
|
225 ADC
|
267 ADC
|
204 ADC
|
|
Inverter efficiency
|
89%
|
89%
|
88%
|
87%
|
|
Transfer time
|
16 msecs
|
16 msecs
|
16 msecs
|
16 msecs
|
|
Search Mode
|
0.3 ADC
|
0.3 ADC
|
0.3 ADC
|
0.3 ADC
|
|
No Load (120 VAC output with remote)
|
2 ADC
|
2 ADC
|
2 ADC
|
0.6 ADC
|
|
Waveform
|
Pure Sine Wave
|
Pure Sine Wave
|
Pure Sine Wave
|
Pure Sine Wave
|
| Charger Specifications
|
|
Continuous Output at at 25 ºC
|
100 ADC
|
100 ADC
|
125 ADC
|
105 ADC
|
|
Charger efficiency
|
85%
|
85%
|
85%
|
85%
|
|
Power factor
|
> 0.95
|
> 0.95
|
> 0.95
|
> 0.95
|
|
Input current at rated output (AC amps)
|
15
|
15
|
18
|
29
|
| General Features and Capabilities |
|
Transfer relay capability
|
MS2000: 30 A single input
MS2012, MS2812, MS4024: 2 legs at 30 A for 120 V/30 A or 240 V/60 A service
|
|
Five stage charging capability
|
Bulk, Absorb, Float, Equalize, and Battery Saver
|
|
Battery temperature compensation
|
With available temp sensor (battery temp 0 - 50 ºC)
|
|
Remote inverter on/off switch
|
With available pigtail to connect to dry contact
|
|
Internal cooling
|
0 to 120 cfm variable speed drive using dual 92mm brushless DC fans
|
|
Overcurrent protection
|
Yes, with two overlapping circuits
|
|
Overtemperature protection
|
Yes on transformer, MOSFETS, and battery
|
|
Conformal coating on PCB's for corrosion protection
|
Yes
|
|
Powder coated chassis & top for corrosion protection
|
Yes
|
|
Stainless steel fasteners for corrosion protection
|
Yes
|
|
Dual AC branch rated output breakers
|
Optional on the MS2000 and MS2012 - AC breakers in 15 or 20 amp ratings
|
|
Listings
|
ETL Listed to UL/cUL 458, UL 1741, CSA C22.2 #107.1-01, meets KKK-A-1822E standard
|
|
Warranty
|
Three years
|
|
| Environmental Specifications |
|
Operating temperature
|
-20 ºC to + 60 ºC (-4 ºF to 140 ºF)
|
|
Nonoperating Temperature
|
-40 ºC to + 70 ºC (-40 ºF to 158 ºF)
|
|
Operating Humidity
|
0 to 95% RH non-condensing
|
|
|
| Physical Specifications |
|
Dimensions (l x w x h)
|
13.75" x 12.65" x 8.0" (34.9 cm x 32.1 cm x 20.3 cm)
|
|
Mounting
|
Shelf (top or bottom up) or bulkhead (vents up)
|
|
Weight
|
43 lb (19.5 kg)
|
43 lb (19.5 kg)
|
53 lb (24.0 kg)
|
58 lb (26.3 kg)
|
|
Max operating altitude
|
15,000' (4570 m)
|
3-year warranty
Product Reviews
| (1 Rating, 0 Reviews) |
Average Rating:
|
|
|